Last night I packaged everything up in the trail camera lunch box and gave it the first outdoors test. The first thing it captured was this little guy!
I think there may still be a few things to sort out. The PIR sensor may not be very sensitive or the code may not be 100% functioning correctly (though it seemed to be in all other tests I ran indoors), as the videoing stopped before I would have thought it should. However, as the very first thing it captured was the hedgehog I am very pleased with the result!
One thing I’ve always wanted to do with my Raspberry Pi was to build a trail camera, and when the Pi Zero was released with a camera port I thought that it was about time I stopped wanting to do it and actually just do it.
It took a while to get parts delivered from various places, but eventually in the last week or so I have finally built a trail camera. I’ll probably post more about that at a later date, but the most intriguing part for me was the programming…
Most of the trail cameras I had seen on the internet that people had built would either take a photo when a PIR sensor was triggered or would take just time lapse photos all night. Neither of these solutions really appealed to me. What I wanted was a video, and more than that I didn’t just want a video to record for a few seconds and stop. I wanted it to keep recording as long as there was movement triggered by a PIR.
What I like about my solution is that when the PIR is triggered it will start recording for a definable number of seconds. If the PIR is triggered within that time it’ll just extend the record time by that many seconds again, and so on and so on until the PIR hasn’t been triggered for at least that many seconds at which point the recording will end.