Andy's blog o' goodness – Page 3 – php, web stuff, raspberry pi… even blacksmithing!

November 20, 2017

Git and Windows; file path too long – fix!

I ran into an issue today with Git and Windows… I was trying to do a pull from a repo and it kept failing because one of the file paths was too long. Very frustrating! Thankfully there was a simple fix; just running this from the shell: git config –system core.longpaths true

Code snippets Comments: 0

August 25, 2017

I forged a necklace

Made this necklace for my better half. It was the first thing I forged on my bbq-forge and it came out not too bad. I had to dress my hammer after as I was leaving too many cuts in the metal (though that has a lot to do with my inexperience!), which worked a treat! Kind of wish I had...

Blacksmithing Comments: 0

July 22, 2017

Filter an array of objects

Quite often I might have an array of objects, be it from a db query or some json object, and I want to filter that list in a particular way. Lots of times I would find myself doing the same old thing; creating a new array, looping and looping until all I had left was what matched my filter. I’m...

Code snippets/PHP Comments: 0

July 19, 2017

First “proper” thing made with a hammer and anvil

On this past weekend the family and I went camping with a few friends, and a lovely time was had by all (despite a couple bee stings and a bad face-plant by someone into a pavement). While taking down the tent we realised that our tent peg puller was a little weak and we even struggled with it to pull...

Blacksmithing Comments: 0

July 17, 2017

First blacksmithing session

I had my first blacksmithing session last week, and it was probably the most fun I’ve had with a hammer and metal in… well, I’m too old now to remember how long ago things were. But a long time, let me tell you. At first I learned how to draw down to a square point, and then built on that...

Blacksmithing Comments: 0

May 31, 2017

Cleaning up my vice

Along with the anvil I was also given a leg vice. This is a heavy-duty vice with a long pole that goes down into the ground a little way to transfer energy away from the hammer blows or moving the metal making it less likely that the vice will break under use. It was thrown in with the anvil because,...

Blacksmithing Comments: 0

May 28, 2017

Cleaning up my anvil

The anvil I was given for my birthday is wonderful, but was really rusty. Not knowing the best way to clean it up I hit a very popular smithing forum called I Forge Iron. The people on there were nothing but friendly and helpful and gave really good advice about my ol’ girl and how to clean her up. All...

Blacksmithing Comments: 0

May 23, 2017

And now for something completely different… blacksmithing!

For quite some time now I’ve loved the idea of blacksmithing. There just seems to be something about heating up metal over a hot forge, the ring of the anvil, that harks back to times gone by. I’ve always joked with my wife that if I didn’t do web development I’d do blacksmithing. Two problems with that, though; I’m not...

Blacksmithing Comments: 0

January 11, 2017

Rotary volume control for the Raspberry Pi

If you have checked out my previous post, you know I want to create a clock radio powered by the Raspberry Pi with the audio coming out of a JustBoom AMP Zero pHAT. One of the things that I thought would be quite handy (probably necessary) would be volume control. Ideally that would be some kind of hardware rotation controller,...

Raspberry Pi Comments: 8

January 5, 2017

PiZero Clock Radio – Part 1

Long story short; I have a clock radio and it can just about play something from the radio and wake me up in the morning. But if the power goes out it never remembers the time or what any of the radio stations were, and it completely lacks the ability to auto-seek for stations (and I can never remember what...

Raspberry Pi Comments: 2